Blast Dampers
Halton & Flamgard Blast Dampers
Blast dampers are devices used to mitigate the effects of explosions or blasts in various industrial, commercial, and residential settings. They are designed to minimize damage to structures and equipment, protect personnel, and maintain the integrity of the building envelope during a blast event. Blast dampers work by absorbing, redirecting, or dissipating the energy generated by an explosion, thereby reducing the pressure and impulse caused by the blast. Click the picture to see the basic operation principle of Halton BDH blast damper.
BLD-01 – High Pressure Blast Damper
Flamgard type BLD-01 High Pressure Blast Damper is of a high performance design suitable for the arduous conditions encountered in offshore/onshore oil and gas, marine, nuclear, tunnel and industrial environments. The Blast Damper has been independently blast performance tested and is certified by SIRA to 04ATEX9322 for ATEX Group II Category 2 G/D use by SIRA.
BLD-02 – Medium Pressure Blast Damper
Flamgard type BLD-02 Medium Pressure Blast Damper is of a high performance design suitable for the arduous conditions encountered in offshore/onshore oil and gas, marine, nuclear, tunnel and industrial environments. The Blast Damper has been independently blast performance tested and is certified bvy SIRA to 04ATEX9322 for ATEX Group II Category 2 G/D use by SIRA.
BDH – Blast protection damper
Halton BDH blast dampers protect against overpressure in offshore, onshore and heavy industry ventilation systems. The BDH blast damper can be installed in rectangular ducts or wall openings. When the blades are in the open position, the device does not cause significant pressure loss, noise or flow disturbance.
PVKKS – Blast Valve
The PV-KK-S blast valve block comprises three spring balanced closing elements moving in a slot and closing the air passage against the valve seats in response to both positive and negative (suction) phase of the blast. The valve blocks are mounted in structural steel frames.
PVKKSX – Blast Valve
The PV-KK-SX blast valve block comprises three spring balanced closing elements moving in a slot and closing the air passage against the valve seats in response to both positive and negative (suction) phase of the blast. The valve blocks are mounted in stainless steel frames.
Not sure which product is a perfect match for your need?
Don’t worry, consult us!