CCD-02 – Medium Duty Control Damper

Flamgard CCD-02 Medium Duty Control Damper has been specifically designed for the industrial market where medium weight, construction and dependable operation are of prime importance. These versatile dampers are suitable for automatic and manual operation and may be used for: system balancing, pressure control, fresh air re circulation and many more functions.

• Can also be utilized as an High Integrity Isolation damper and/or Volume control damper
• SIL 2 rated to IEC 62508-2:2010
• ATEX rated

CCD-C1 – Circular Control Damper

Flamgard type CCD-C1 Circular Control Damper has been designed to fit into circular ductwork systems where space is restricted. These versatile dampers are suitable for automatic and manual control and may be used for fan shut-off, fresh air re circulation and many more functions.

• SIL 2 rated to IEC 62508-2:2010
• ATEX rated

CVD-C1 – Circular Constant Volume Control Damper

Flamgard type CVD-C1 Circular Control Damper has been designed to fit into circular ductwork systems where space is restricted. These versatile dampers are designed to maintain a constant volumetric flow rate. The control system allows for the required flow rate value to be set and can include both upper and lower threshold values. 

UTP – Balancing damper

Halton UTP dampers are used to balance airflow rates in high pressure ductwork. Dampers meet international standards for rectangular and round ducts. In the open position, the blades face the direction of flow and do not cause a significant pressure loss.

• Leakage class of a closed damper according to EN 1751:2014 class 1. Tested size 1000×1000 mm
• Classification of casing leakage (EN 1751:2014) class B

UTG – Gastight shut-off damper

Halton UTG dampers are used to shut-off and balance airflow rates in high pressure ductworks. Dampers meet international standards for rectangular and round ducts. In the open position, the blades face the direction of flow and do not cause a significant pressure loss. 

• A closed damper fulfils the requirement of leakage class up to class 3 (EN1751:2014). Details available from Halton
• Classification of casing leakage (EN 1751:2014) class B

UTA – Gastight shut-off damper

Halton UTA dampers are used to shut-off and balance airflow rates in high pressure ductworks. Dampers meet international standards for rectangular and round ducts. In the open position, the blades face the direction of flow and do not cause a significant pressure loss. The UTA is used as a shut-off, gas and balancing damper in applications where tightness and reliability are important.

• A closed damper fulfils the requirement of leakage class 3 (EN1751:2014) for size ≥ 300×300 mm (stainless steel seals) and for size ≥ 150×150 mm (silicon seals)
• Classification of casing leakage (EN1751:2014) class C

UTT – Multi-blade airflow management damper

Halton UTT dampers are used to shut off or control airflow in ductwork where tightness, thermal insulation and reliability are important.
In the closed position the Halton UTT damper leakage class is 3 in accordance with the EN1751 standard.